To inspect your vehicle fluid levels regularly yourself, will keep your car in top condition. Vehicle fluid levels need to be checked, because if they get too low, your vehicle performance will suffer.
Vehicle Fluid Levels Need to be Checked
If you wish to keep your car or truck running well, it is best to learn what fluid levels need to be checked, and then do it regularly.
Your automobile handbook will have all the details you need, to help you keep your fluid levels where they should be. There will be a diagram of the motor and the specific location of all the fluid containers. In order to be certain, you can do extra investigation on the internet.
To inspect the motor oil level, there is a cap at the front of the engine labeled, not surprisingly, oil. To take a look at the oil level, make sure the engine is off, then remove the dipstick, and rub off the oil with a paper-towel or rag.
Set the dipstick completely back in, then pull it out once more to get your oil level. You want to be sure that the oil on the dipstick is within the top and lowest marks. If it is under, then you will want to add some oil.
When you have an older car, oil has a tendency to leak in a few areas, so you must look at the fluid levels every couple of weeks.
If your vehicle has an automatic transmission, then you should check out its level, too. Stick to the same procedure as when examining the motor oil level, but the transmission fluid level only requires looking at once a year, unless you know it is leaking.
For checking the transmission fluid level, you are going to need to have the car operating while being in the neutral or park position. You need to have the engine warmed up, easily achieved by driving around the block. A warm engine is necessary to obtain an accurate reading.
To check your automatic transmission fluid, look for a dipstick handle sticking out of your transmission. This is located toward the rear of the motor
Dip the tip of your index finger into the fluid on the dipstick and rub the fluid between your finger and the tip of your thumb. The transmission fluid on the dipstick should be pinkish and almost clear. If it looks or smells burnt or has particles in it, have a mechanic drain and change the fluid.
When you want to check the car’s coolant level, never do it after you just finished driving your car. The coolant is usually very hot and you could get burned. Coolant levels can be seen in an overflow container found in many cars.
It is not uncommon to be unsure of just how hot the coolant is. Therefore, provided the motor has had time to cool, place a cloth over the cap and turn it counterclockwise just to its first stop.
Turning to the first stop allows some of the pressure to escape, but if you see liquid or a great deal of steam escaping, retighten the cap and wait for things to cool down further. If nothing escapes, continue turning the cap counterclockwise to remove it.
The power steering fluid will need to also be looked at routinely. Power steering fluid is checked when the engine is cold, although some cars allow for this to be done hot or cold.
The power steering fluid reservoir is under the hood, and usually on the passenger’s side of the vehicle, but this can differ between vehicles makes. The word “steering” will be embossed on it.
The brake fluid is another thing to consider as well. Paint can be ruined if you are not careful when dealing with brake fluid.
The windshield wiper fluid is perhaps the easiest one that you need to look at regularly. Washer fluid is relatively safe and won’t harm other parts if accidentally spilled.
Presently, most people do not even know how or when you ought to have a look at the vehicle fluid levels. Typically, folks have the fluids looked at when they book the car in for an oil change.
With just a small change in your routine, by making it a habit to inspect your vehicle fluid levels regularly, not only will it last longer, but you will also save money at the garage.